HELIX DSP PRO MK3
9 990 kr / Styck
Nästa evolutionära steg av DSP PRO Bekant utseende med (r)evolutionen inuti. Efterföljaren till DSP PRO kommer i den välkända, eleganta HELIX-designen, men är utrustad med den senaste tekniken: Oöverträffad högupplöst ljudkvalitet tack vare dubbelt så mycket processorkraft jämfört med föregångaren ACO Platform för en utökad funktionsuppsättning också som VCP (Virtual Channel Processing) för enkel konfiguration av mycket komplexa ljudsystem. Dessutom finns de reviderade högnivåingångarna med trestegs ingångskänslighetsjustering och utökat spänningsområde upp till max. 32 Volt samt vår extremt kompakta och solida Smart Control Port. En sak är säker: Tack vare alla dessa toppmoderna teknologier tillhör DSP PRO MK3 utan tvekan A-listan över signalprocessorer.
Läs mer
*INFO OM LAGERSALDO
- Då vi jobbar med flera externa lager för direktleverans till kund, så kolla gärna vårt butikslager först innan du besöker butiken i Ullared då varan kanske inte finns i den FYSISKA butiken.
- Gäller även beställningar som hämtas i butik!
- Vi kan inte bli ansvariga att leverera en produkt som är slutsåld eller utgången ur sortimentet. Skulle en produkt inte gå att leverera så meddelar vi det via E-post eller per Telefon.
- Vi strävar givetvis mot att kunna leverera det vi har på våran sida.
- Är du osäker så skicka gärna ett mail till info@ullareddigital.se
State-of-the-art Technology and TwinDSP power for the ultimate High-Res sound experience
The DSP PRO MK3 is equipped with two of the most powerful 64-Bit audio signal processors from Analog Devices. The incredible processing power of 2.4 billion MAC operations per second, combined with the high sampling rate of 96 kHz (resulting in an audio bandwidth of over 40 kHz) and AKM Velvet Sound A/D and D/A signal converters, ensure outstanding sound in High-Res quality.
ACO – Advanced 32 Bit CoProcessor Platform
The DSP PRO MK3 is now equipped with our proprietary 32 Bit ACO platform, which doesn’t just take over all control tasks ultra-fast, but also handles a bunch of audio functions: Now, fantastic sound effects such as Augmented Bass Processing or Real Center are implemented as well as a channel-separated Input EQ including Input Signal Analyzer (ISA) for easy analysis and compensation of input signals of OE radios, which already include a sound setup ex works.
All you need for optimal connectivity
With its wide range of in- and outputs (8 x high level, 8 x RCA, 1 x optical, 1 x coaxial, 1 x HEC slot & 10 x line output), the DSP PRO MK3 offers everything for an easy adaptation to existing factory radios or multi-channel OE sound systems. Additionally, the extended voltage range allows the combination with almost any imaginable analog signal source, even with high-power OE amplifiers.
DSP PC-Tool 5 feat. TuneEQ – Powerful features for ultimate sound experiences
Of course, the HELIX DSP PRO MK3 can be easily configured via our new, professional and exceptionally intuitive DSP PC-Tool 5. The well-known, numerous setting options with their extensive sound processing functions leave nothing to be desired and guarantee an extremely precise sound adjustment even under the most difficult conditions. And thanks to the new, proprietary TuneEQ function for automated frequency response correction, you also save a lot of time when optimizing your sound.
Features
TwinDSP Power – two extremely powerful “fixed point” Audio DSPs with 64 Bit resolution and 2.4 billion MAC operations per second
State-of-the-art 32 Bit AD and DA signal converters from AKM
ACO – Advanced 32 Bit CoProcessor platform for extended feature set
ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals
Proprietary TuneEQ function for automated adjustment of the output equalizers
SFX (DSP Sound Effects) – Augmented Bass Processing, RealCenter & Co.
VCP (Virtual Channel Processing) allows even more flexible configuration for highly complex sound systems
HEC slot for system add-ons like Bluetooth® HD Audio Streaming, High Resolution Audio Streaming via USB etc.
Smart 8-channel highlevel input with ADEP.3 circuit
Start-Stop capability down to 6V supply voltage
“Ground lift” switch to avoid ground loops
Channel pair separated, three-stage input sensitivity adjustment (highlevel up to max. 32 Volts, RCA / Cinch up to max. 4 Volts)
Compact, future-proof SCP (Smart Control Port) for connecting remote controls and accessories
Time alignment with up to 20 ms delay time per channel, additionally reverse time alignment for in-phase summation of the inputs
Freely definable signal routing with separate matrices for line, SPDIF and HEC/AUX
Inputs: 8 x RCA/Cinch, 8 x Highlevel, 1 x optical SPDIF and 1 x coaxial SPDIF
Outputs: 10 x RCA/Cinch with max. 8 Volts output voltage
Easiest configuration via the intuitive DSP PC-Tool 5 software
Special features:
TwinDSP Power
The DSP PRO MK3 contains two of the most powerful 64 Bit audio signal processors from Analog Devices with the outstanding overall calculating power of 2.4 billion MAC operations per second.
The TwinDSP Power concept makes the twelve separately processed channels and the numerous new sound features in combination with the extended sampling rate of 96 kHz (resulting in an audio bandwidth of more than 40 kHz) possible.
ACO – Advanced 32 Bit CoProcessor
The HELIX DSP PRO MK3 incorporates an extraordinary powerful 32 Bit CoProcessor of the latest generation. This not only takes over all control tasks ultra-fast, but also the lightning-fast switching between up to ten possible sound setups. But ACO offers much more – besides a channel-separated Input EQ including Input Signal Analyzer (ISA) for easy analysis and compensation of input signals of OE radios and fantastic sound effects like Augmented Bass Processing or RealCenter, there is now the revolutionary TuneEQ function for automated adjustment of the output equalizers.
A further significant advantage is the integrated, native boot loader of the CoProcessor. It allows software upgrades of all components of the DSP in order to adjust the microcontroller-controlled ADEP.3 circuit for example at future modifications / changes in the diagnostic system of factory radios or if the device will be extended with additional interfaces.
Smart highlevel input ADEP.3
Modern, factory-installed car radios incorporate sophisticated possibilities of diagnosing the connected speakers. In particular the latest generation of car radios are equipped with additional monitoring functions so that failure messages and loss of specific features (e.g. fader function) quite often appear if a signal processor will be hooked up – but not with the DSP PRO MK3.
The new ADEP.3 circuit (Advanced Diagnostics Error Protection, 3rd Generation) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.
Start-Stop capability
The switched power supply of the HELIX DSP PRO MK3 assures a constant internal supply voltage even if the battery’s voltage drops to 6 Volts during engine crank.
Power Save Mode
The Power Save Mode is incorporated in the basic setup. It allows to significantly reduce the power consumption of the amplifiers that are connected to the HELIX DSP PRO MK3 once there’s no input signal present for more than 60 seconds. Please note that in many up-to-date cars with “CAN” or any other internal bus structures it may happen that the radio remains “invisibly” turned on for up to 45 min. even after locking and leaving the car! Once the “Power Save Mode“ is active the remote output and therefore the connected amplifiers will be turned off. The
The DSP PRO MK3 is equipped with two of the most powerful 64-Bit audio signal processors from Analog Devices. The incredible processing power of 2.4 billion MAC operations per second, combined with the high sampling rate of 96 kHz (resulting in an audio bandwidth of over 40 kHz) and AKM Velvet Sound A/D and D/A signal converters, ensure outstanding sound in High-Res quality.
ACO – Advanced 32 Bit CoProcessor Platform
The DSP PRO MK3 is now equipped with our proprietary 32 Bit ACO platform, which doesn’t just take over all control tasks ultra-fast, but also handles a bunch of audio functions: Now, fantastic sound effects such as Augmented Bass Processing or Real Center are implemented as well as a channel-separated Input EQ including Input Signal Analyzer (ISA) for easy analysis and compensation of input signals of OE radios, which already include a sound setup ex works.
All you need for optimal connectivity
With its wide range of in- and outputs (8 x high level, 8 x RCA, 1 x optical, 1 x coaxial, 1 x HEC slot & 10 x line output), the DSP PRO MK3 offers everything for an easy adaptation to existing factory radios or multi-channel OE sound systems. Additionally, the extended voltage range allows the combination with almost any imaginable analog signal source, even with high-power OE amplifiers.
DSP PC-Tool 5 feat. TuneEQ – Powerful features for ultimate sound experiences
Of course, the HELIX DSP PRO MK3 can be easily configured via our new, professional and exceptionally intuitive DSP PC-Tool 5. The well-known, numerous setting options with their extensive sound processing functions leave nothing to be desired and guarantee an extremely precise sound adjustment even under the most difficult conditions. And thanks to the new, proprietary TuneEQ function for automated frequency response correction, you also save a lot of time when optimizing your sound.
Features
TwinDSP Power – two extremely powerful “fixed point” Audio DSPs with 64 Bit resolution and 2.4 billion MAC operations per second
State-of-the-art 32 Bit AD and DA signal converters from AKM
ACO – Advanced 32 Bit CoProcessor platform for extended feature set
ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals
Proprietary TuneEQ function for automated adjustment of the output equalizers
SFX (DSP Sound Effects) – Augmented Bass Processing, RealCenter & Co.
VCP (Virtual Channel Processing) allows even more flexible configuration for highly complex sound systems
HEC slot for system add-ons like Bluetooth® HD Audio Streaming, High Resolution Audio Streaming via USB etc.
Smart 8-channel highlevel input with ADEP.3 circuit
Start-Stop capability down to 6V supply voltage
“Ground lift” switch to avoid ground loops
Channel pair separated, three-stage input sensitivity adjustment (highlevel up to max. 32 Volts, RCA / Cinch up to max. 4 Volts)
Compact, future-proof SCP (Smart Control Port) for connecting remote controls and accessories
Time alignment with up to 20 ms delay time per channel, additionally reverse time alignment for in-phase summation of the inputs
Freely definable signal routing with separate matrices for line, SPDIF and HEC/AUX
Inputs: 8 x RCA/Cinch, 8 x Highlevel, 1 x optical SPDIF and 1 x coaxial SPDIF
Outputs: 10 x RCA/Cinch with max. 8 Volts output voltage
Easiest configuration via the intuitive DSP PC-Tool 5 software
Special features:
TwinDSP Power
The DSP PRO MK3 contains two of the most powerful 64 Bit audio signal processors from Analog Devices with the outstanding overall calculating power of 2.4 billion MAC operations per second.
The TwinDSP Power concept makes the twelve separately processed channels and the numerous new sound features in combination with the extended sampling rate of 96 kHz (resulting in an audio bandwidth of more than 40 kHz) possible.
ACO – Advanced 32 Bit CoProcessor
The HELIX DSP PRO MK3 incorporates an extraordinary powerful 32 Bit CoProcessor of the latest generation. This not only takes over all control tasks ultra-fast, but also the lightning-fast switching between up to ten possible sound setups. But ACO offers much more – besides a channel-separated Input EQ including Input Signal Analyzer (ISA) for easy analysis and compensation of input signals of OE radios and fantastic sound effects like Augmented Bass Processing or RealCenter, there is now the revolutionary TuneEQ function for automated adjustment of the output equalizers.
A further significant advantage is the integrated, native boot loader of the CoProcessor. It allows software upgrades of all components of the DSP in order to adjust the microcontroller-controlled ADEP.3 circuit for example at future modifications / changes in the diagnostic system of factory radios or if the device will be extended with additional interfaces.
Smart highlevel input ADEP.3
Modern, factory-installed car radios incorporate sophisticated possibilities of diagnosing the connected speakers. In particular the latest generation of car radios are equipped with additional monitoring functions so that failure messages and loss of specific features (e.g. fader function) quite often appear if a signal processor will be hooked up – but not with the DSP PRO MK3.
The new ADEP.3 circuit (Advanced Diagnostics Error Protection, 3rd Generation) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.
Start-Stop capability
The switched power supply of the HELIX DSP PRO MK3 assures a constant internal supply voltage even if the battery’s voltage drops to 6 Volts during engine crank.
Power Save Mode
The Power Save Mode is incorporated in the basic setup. It allows to significantly reduce the power consumption of the amplifiers that are connected to the HELIX DSP PRO MK3 once there’s no input signal present for more than 60 seconds. Please note that in many up-to-date cars with “CAN” or any other internal bus structures it may happen that the radio remains “invisibly” turned on for up to 45 min. even after locking and leaving the car! Once the “Power Save Mode“ is active the remote output and therefore the connected amplifiers will be turned off. The
Liknande produkter
